PINE TECHNOLOGY

PT-604

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two IDE (AT) Interface drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB or 1.44MB drives

[Image]

                             CONNECTIONS

                    Function                          Location

  9-pin serial port 1 (COM1/3)-internal                  CN1

  25-pin parallel port (LPT1/2)-external                 CN2

  40-pin AT Interface (IDE) connector-internal           CN3

  34-pin control cable connector-floppy drive            CN4

  16-pin game port-internal                              CN5

  9-pin serial port 2 (COM2/4)-internal                  CN6

  4-pin connector-drive active LED                       CN7

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Floppy drive controller                 JP1            pins 1 & 2
      enabled                                                 closed

      Floppy drive controller                 JP1            pins 2 & 3
      disabled                                                closed

  »   Hard drive port address is              JP2            pins 1 & 2
      1F0-1F7h                                                closed

      Hard drive port address is              JP2            pins 2 & 3
      170-177h                                                closed

  »   Floppy drive port address is            JP3            pins 1 & 2
      3F1-3F7h                                                closed

      Floppy drive port address is            JP3            pins 2 & 3
      371-377h                                                closed

  »   Hard drive controller enabled           JP4            pins 1 & 2
                                                              closed

      Hard drive controller disabled          JP4            pins 2 & 3
                                                              closed

  »   Parallel Port (CN2) is set to           JP5            pins 1 & 2
      LPT1 (378h)                                             closed

      Parallel Port (CN2) is set to           JP5            pins 2 & 3
      LPT2 (278h)                                             closed

  »   Serial Port 1 (CN1) is set to           JP6            pins 1 & 2
      COM1 (3F8h)                                             closed

      Serial Port 1 (CN1) is set to           JP6            pins 2 & 3
      COM3 (3E8h)                                             closed

  »   Serial Port 2 (CN6) is set to           JP7            pins 1 & 2
      COM2 (2F8h)                                             closed

      Serial Port 2 (CN6) is set to           JP7            pins 2 & 3
      COM4 (2E8h)                                             closed

  »   Serial Port 2 (CN6) is enabled          JP8            pins 1 & 2
                                                              closed

      Serial Port 2 (CN6) is                  JP8            pins 2 & 3
      disabled                                                closed

  »   Serial Port 1 (CN1) is enabled          JP9            pins 1 & 2
                                                              closed

      Serial Port 1 (CN1) is                  JP9            pins 2 & 3
      disabled                                                closed

  »   Parallel Port (CN2) enabled            JP10            pins 1 & 2
                                                              closed

      Parallel Port (CN2) disabled           JP10            pins 2 & 3
                                                              closed

  »   Floppy drive controller                JP11            pins 2 & 3
      enabled                                                 closed

      Floppy drive controller                JP11            pins 1 & 2
      disabled                                                closed

  »   Game Port (CN5) enabled                JP14            pins 1 & 2
                                                              closed

      Game Port (CN5) disabled               JP14            pins 2 & 3
                                                              closed